Hello，Current Location：Home >> Compact Spinning Device

Compact Spinning Device

①、Structural Characteristics：

1、Four-Roller Structure, Gear Transmission.
2、Negative Pressure Is Controlled By Main Fan, Air Duct And Frequency Converter.
3、 The Branch Air Duct Uses Plexiglass With Good Sight.

②、Parts Picture

Irregular Tube
1、Surface Hard Oxidation Treatment.
2、With Wear-Resistant Plate, Prolonged Service Life, Easy To Change Varieties.
3、Torsion Spring Or Compression Spring Is Used For Tension Frame, Which Has Good Consistency.
4、Components Can Be Split And Maintained Conveniently.
Bridge Gear, Grid Ring, Plexiglass Pipe, Tee, Special-Shaped Pipe Elbow, Adjusting Seat.



③、Spinning Environment Requirements：

1、Requirements Of Temperature, Humidity And Air Dust Concentration In Spinning Workshop.
2、Temperature: 25 ~ 30° Throughout The Year.
3、Relative Humidity: 55%±5°C (Cotton).
4、The Dust Concentration In The Air Is < 3mg/M³ .
5、It Is Recommended To Equip With A Roving Cleaner.

④、Effect Of Compact Spinning Device：

1、 Reduce Hairiness, And Hairiness Above 3mm Can Be Reduced By More Than 60%; ；
2、Under The Same Spinning Conditions, The Yarn Strength Is Increased By 5%-15% Compared With That Of Ordinary Ring Spinning；
3、Improve The Cv Value Of Spun Yarn Evenness；
4、The Broken End Rate Is Reduced；
5、Improve The Working Environment And Reduce The Flying Flowers In The Workshop；



⑤、Transformation And Installation：

The Compact Spinning Reformation Of The Spinning Frame With This Device Will Not Destroy Any Parts Of The Original Equipment, But Only Need To Replace The Drafting Part, Roller Seat, Front Roller, Cotton Suction Flute Pipe And Rear Bellows. In Addition, Compact Spinning Parts Can Be Added.